Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

October 06 2017

housepaintingdublin

Interior Home Painting Tips

Purchasing:


- Purchase a quart first instead of a large quantity in case you're not dedicated to the color. Paint a sheet of foam board and move it across the room to determine how the color is affected by the light .
- Know the square footage of the room you're painting before you head to the store. The pros recommend one gallon for each 400 square feet. Textured, coarse or unprimed surfaces may need more.
- Do not apply latex on an oil end and vice versa without first trimming the walls (remember to put on a mask) and wiping away the dust particles with a tack cloth. Apply a primer of the identical composition (latex or oil) of the intended topcoat. To tell whether your present wall color is water- or oil-based, douse a white cloth with rubbing alcohol and rub it on the wall (within a out-of-the-way spot). If the paint softens and starts to move onto the cloth, it is water based. If the alcohol does not get rid of any shade, it's oil-based.
- Don't underestimate how much time it is going to take you to get the task done.  Allow two weeks to 30 days to cure before wiping or washing.
- Paints have volatile organic compounds (VOCs ) that could release toxic gas to the air for years after a room has been painted. Paint with low-VOCs or zero-VOCs. -Paints with a green seal have a VOC of less than 150 grams/liter of non-flat and less than 50 grams/liter for flat.
Prep:
- Paint doesn't stick very well to filthy walls, so wash them with soap and water (or TSP) and wash with water once done. Let dry.
- sterile ceilings before painting. There will be dust and cobwebs that you just don't see.  Overlap the tape seams by at least an inch to avoid seepage between pieces, and after that seal the tape.
- Do not pay the floors with plastic as it can be very slippery. Use drop cloths or old sheets to protect them from splatters and drips.
- The colour mixer in the paint shop can create small variations from can to can. The last thing you want is to have 2 shades of a color on the wall. By mixing the paint cans all together before you begin painting to ensure you will have consistent color throughout the 26, this may be remedied.
painters Dublin
- Fill holes with spackle using a five-in-one instrument or wide blade and caulk where necessary. Sand dry spackle smooth, and deepest each spot.
- Do not underestimate how long it'll take you to find the job done.  Allow 2 weeks to 30 days to cure before washing or wiping.
- Removing socket covers makes for a much neater paint job. Tape tape over the socket or light switch , and the screws to the cover to keep paint from getting on them.
Painting Ceilings:
- Scaffolding comes in components called "bucks" and "cross dollars". To get a high ceiling, four bucks should suffice. Each dollar prices about $12 a day to rent. You want: walk boards or planks to place along the bucks, these rent for about $10 every per day. -for scaffolding Wheels rent individually. They are important because they allow the scaffolding to transfer effortlessly. Four wheels rent for about $25 per day.
- When painting a textured ceiling, make certain to use a thick-nap roller to make certain you get full coverage over the bumps and irregularities in the textured surface. With a smooth or shorter nap, you may use a roller for a smooth drywall ceiling.
DSEQ507_how-to-waterproof-cinderblock_s4x3
Time-Saving Options:
Buy a good quality edger (they're fairly inexpensive) and take your time at the corners so that you don't spend all of the excess time taping off everything.
- A 2-inch angled-sash brush can also be utilized for cutting into corners.-Hold it like a pencil and paint a steady line.
- If you take a rest whilst painting, cover rollers in plastic wrap and refrigerate so that you don't need to clean them every time you stop.

- Consider skipping the paint trays and using a five-gallon bucket with a roller screen indoors. This saves time on re-filling and filling the bucket.
It allows the paint.
Tools:
Do not use natural bristlesbased paint, the water may create the bristles limp. Foam brushes are good for intricate work like window casings or painting molding. These brushes last for only 1 use because they're hard to clean and easy to tear.
- If your project requires oil-based paint, natural bristles like ox or hog hair are perfect because they hold paint better than artificial bristles.
- If you're using latex paint, then nylon and polyester brushes are a lot better since they don't absorb water like natural fibers.
- Great all-purpose brushes are flagged, meaning the bristles change in length slowly coming to a peak in the middle of the brush. Brushes that are flagged offer a smooth, even layer of paint.
- Use the right roller for your job. For smooth surfaces like wood and wallboard, use a roller with a rest. For surfaces with texture, bigger sticks can lessen the number of coatings -- and the period of time spent painting.

You'll need solvents to get rid of it, if the paint dries on the brush. You can clean the brushes in your sink, but you should be cautious not to dispose of paint in an area where it might seep into the groundwater if your residence is on a sewer system.
- To oil-based paints, so you are going to need a solvent such as paint thinner or mineral spirits. Pour about 2 inches of thinner into a metal container and swirl the dirty brush in it until the paint comes off.
- Moist paintbrushes can be wrapped in plastic or waxed paper and sealed with a rubber band or aluminum foil. Hang brushes down to keep their shape.
- Maintain a stash of paint for touch-ups in a little plastic cup or glass jar, such as margarine containers or baby food jars (totally washed, of course). Be sure to label each container with the brand and color name.
- A common problem called "hatbanding" takes place when painters use a paintbrush for clipping in and a roller to use the remaining portion of the paint, thus producing a different texture across the ceiling and trim. To prevent hatbanding, roll the paint as close to the cut-in regions as possible. 

Don't be the product, buy the product!

Schweinderl