Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

How to Paint the Exterior of a Brick House

Should you paint brick? 
house paintersOccasionally
Individuals tend to paint a home exterior to pay for the bare brick
siding. This is because it has become weathered or stained and also a brick restoration's expense is out of the question.
Painting brick is not advisable, because this substrate is very
porous and absorbent of moisture, therefore making painting difficult.
If you are set on it, there are some significant things. 

know that painting brick isn't reversible. You won't ever have the ability to come back to the former vulnerable look although you may repaint it again to change the color. If a better look can be reached by a cleaning or power-washing, or even a sandblasting you must always consider. Some Toronto painting companies are capable of
work, and likewise should be offered in different cities too. You might be surprised by the pricing compares to exterior painting's option. Some people's most important concern is that there is
old paint splatter on their brick house, and believe hiring painters to
pay it up is the only solution. 

If you go ahead with painting, then
you need to determine if your brick includes a sealer on it. Some sealers are
just about invisible to the eye, and can be tested by spraying water.
 If water beads on the outside you've got a sealer present. If this
is the case, or you find that your brick is raw, surface
preparation has to be done to accomplish a sound and clean surface. Cleaning
or power-washing is crucial to eliminate grime and dirt, as well as
removing any loose mortar and debris that may have accumulated in the
joints or close soffits, etc.. It is absolutely essential to allow
unsealed brick to dry for 3-4 days minimum. This allows the
brick to wash out, as moisture can be held by it for quite some time. It ought to be scraped with wire brushes, since you do not want any loose material if there is any masonry or dust. Openings in the joints should be re-pointed, or filled up
properly, because deep holes will not get painted properly and allow
moisture to penetrate the wall, leading to problems later on.


Peeling paint on improperly prepared bricks... prevent this! 

Can it right now - less headaches afterwards...

Your brick was sealed, you have to consider whether it is paintable
straight or requires an extra primer. You can just try an
test, which means wanting to rub off it and allowing it to cure for a couple hours, and painting a number of the finish paint on. Then you will be fine, if it can't be removed together with your fingernail, and you just require a
premium quality paint. For surfaces that are unsealed, you need to use a
masonry primer. You'll realize that a primer is going to cut back the
quantity of paint needed because it prevents and seals unnecessary
absorption. More importantly, the primer allows for great adhesion into
the brick, which can be an issue as time passes. 

Its also extremely
significant to make sure all areas are sealed nicely with paint and primer,
because if water can get from the paint and into the brick, like
through cracks, the moisture can cause peeling and de-lamination of this
paint. The best deterrent to this is a high quality masonry primer,
because it is designed to fight the natural chemistry of masonry
products when exposed to moisture, such as efflorescence's occurrence. My Toronto painting company has consulted with a
customer regarding such a problem with brick, where paint peeled
off without effort. The area in question was situated close to the floor,
where moisture was abundant. The simple fact is that even when you obey all
needed steps an underlying moisture problem may cause
premature failure. Paint may only do so much; but preparing and priming
properly are your best tools towards a long lasting paint job.


The Essential Prep Checklist
house paintingMaking
Your brick wall look like possible before painting ensures a
terrific paint job, and will enable it to last. Do not forget these crucial

  • repointing the brick where mortar has dropped out, worn out, or
    is just too deep. This can be labor intensive based on condition and the age of a brick wall, but well worth it. 

  • Fill any openings from old home fixtures where screws and bolts were attached. Use the mortar that is identical as for pointing. 

  • Wash mildew and dry completely before painting. This is normally an
    issue near the ground or at areas where rain runoff accumulates. 

  • If your brick is fairly porous, make certain that you apply a good amount of
    primer, two coats if necessary, so that you build up the coating, and this
    will provide a smoother finish. 

  • house painters
    Lastly, you want to pick a finish paint that is going to look
    Great while. A premium latex exterior paint in a
    Finish is great update to an eggshell or satin for a, or looking
    Additional durability and shine.

    Don't be the product, buy the product!